Chinese
     
FAQ : FAX / MODEM CARD Drive
A. BTC Modem Model  
B. Installation information  
C. System requirement  
D. Initialization string  
E. V.80 / V.90  
F. V.90 upgrade  
G. Connectivity
 
 
D. Initialization string  
D-1. What is initialization string?  
D-2. What is the initialization string for BTC modem?  
D-3. What type of modem should I choose for connecting to AOL with 56IP and 56IPI?
 

 
D-1. What is initialization string?
Initialization string is a set of AT commands used to setup modems for application, eg. you can use `ats7=200` in your initialization string to make your modem take more time to detect signal carrier before dropping the line when you are connecting to some ISP's; you can use `ats0=3` in your initialization string to make your modem auto-answer a call after the phone rings three times for some applications.
 
D-2 What is the initialization string for BTC modem?
Refer to your software manual for choosing your modem initialization string. If your modem is not listed in the manual, choose `Hayes Standard Compatible modem`.
 
D-3 What type of modem should I choose for connecting to AOL with 56IP and 56IPI?
In AOL 4.0, please select Modem: `Universal (Hayes Compatible)`, which works fine with our modem. (Port Speed set to 115200bps).
And make sure the COM port setting of the modem is either in COM 3 or COM 4. (You can always set COM Port from HSP Modem Icon in Control Panel.) That's for AOL and some other application software (like Phone Dialer) to work properly.

  © Copyright 2003-2014 BTC. All rights reserved.