CD-RW Driver & Firmware Download
Instructions for use:
A. Flash firmware for DOS mode:
* IDE interface Drive: Before Flash Procedure, please make sure the following:
1. Build a boot disk (floppy) on Windows 98.
2. Unzip the firmware to the other one floppy disk.
3. Boot to DOS mode, and change the firmware disc.
4. If connect the drive to Secondary IDE Channel / Master. Please type "A:> FL 3".
5. If connect the drive to Secondary IDE Channel / Slave. Please type "A:> FL 4".
6. When it flashes to 100%, then finish. And restart computer.
* Warning! Flash program can¡¦t use on DOS mode of Windows!
B. Flash firmware for Windows mode:
1. Please download the appropriate driver file you need from this page.
2. Run the flash program under Windows.
3. Click on the ¡uUpgrade¡vbutton under the flash program
4. ¡uStatus Upgrading¡vis starting to flash the F/W
5. After flashing, the system will appear ¡uComplete¡IPlease restart your computer¡v, then, restart your computer to finish the flash procedure.
1. BTC do not recommend you to upgrade your F/W, if the drive is working properly and does not encounter any irreclaimable problem issues.
2. BTC is not responsible for any defective reasons if the upgrading process caused the issue.

Speed Model Interface Firmware (DOS) Firmware (Windows) USB External Driver
Version Size Version Size File Size
52X BCE 5232IM Internal / IDE N/A 426KB


52X BCE 5224IM Internal / IDE V001U 410KB V001U.exe 625KB
48X BCE 4816IM Internal / IDE V482S 317KB V482S.exe 515KB
40X BCE 4012IM Internal / IDE V409I 304KB N/A N/A
32X BCE 3212IM Internal / IDE V008H 266KB N/A N/A
24X BCE 2410IM Internal / IDE VA.23 213KB N/A N/A
16X BCE 1610IM Internal / IDE V0.20 210KB N/A N/A
52X BCE 5232UI External / USB2.0 N/A N/A V000F.exe 624KB 628 KB
52X BCE 5224UI External / USB2.0 N/A N/A V001U.exe 608KB 628 KB

For burning software related information, please refer to the below website:
  © Copyright 2003-2014 BTC. All rights reserved.